UK next-day delivery · Worldwide shipping 01256 331614 solutions@ltoultrium.com
Quantum LTO Ultrium 9 Data Cartridge MR-L9MQN-01
LTO Ultrium 9 tape

Quantum LTO Ultrium 9 Data Cartridge MR-L9MQN-01

Genuine Quantum MR-L9MQN-01 LTO-9 (LTO Ultrium 9) tape: 18 TB native, 45 TB compressed per cartridge.

BrandQuantum
Part numberMR-L9MQN-01
Capacity18 TB native / 45 TB compressed
PackSingle cartridge · 5, 20 and pre-labelled packs available
AvailabilityIn stock – UK next-day delivery

Quantum MR-L9MQN-01 LTO Ultrium 9 specifications

FormatLTO Ultrium 9 (LTO-9) rewritable data cartridge
Native capacity18 TB
Compressed capacity (2.5:1)45 TB
Native transfer rate400 MB/s
Compressed transfer rate1,000 MB/s
Read inLTO-9 drives
Written inLTO-9 drives
EncryptionHardware AES-256 (drive dependent)
LTFSSupported
Archive lifeUp to 30 years at 16–25 °C, 20–50% RH
Cartridge size102.0 × 105.4 × 21.5 mm

About the Quantum LTO Ultrium 9 tape

Quantum LTO Ultrium cartridges are widely used in Quantum Scalar tape libraries and work in any LTO drive of a compatible generation.

The MR-L9MQN-01 is a rewritable LTO Ultrium 9 cartridge. Because LTO is an open standard, it is fully interchangeable with LTO-9 tapes from other brands.

New LTO-9 cartridges are optimised the first time they are loaded into an LTO-9 drive. This one-off process averages around 40 minutes per tape, so initialise new media before your first backup window.

Compare all LTO Ultrium 9 tapes or browse every LTO Ultrium tape.

FAQ

Frequently asked questions

What is the capacity of LTO-9 tape?

LTO-9 stores 18 TB native and up to 45 TB compressed (2.5:1) — 50% more than LTO-8.

Can an LTO-9 drive read LTO-8 tapes?

Yes. LTO-9 drives read and write LTO-8 cartridges. They cannot read LTO-7 or earlier, and LTO-7 Type M (M8) cartridges are not supported in LTO-9 drives.

Why does a new LTO-9 tape take longer the first time it is loaded?

LTO-9 introduced media optimisation: the first time a new cartridge is loaded the drive characterises the tape to maximise reliability. This one-off process averages around 40 minutes per cartridge and can occasionally take up to two hours, so libraries should be configured to pre-initialise new media before backups are scheduled.

Should I choose LTO-9 or LTO-10?

Choose LTO-9 if you have an existing LTO-8 tape estate or want the lowest entry cost for drives. Choose LTO-10 for maximum capacity per slot, lower cost per terabyte and longer runway — especially for new archives and large libraries where slot count is expensive.

Get a price for the Quantum MR-L9MQN-01

Single cartridges, 5-packs, 20-packs and pre-labelled library packs — we reply the same working day.